Advances in Materials for Oil & Gas Production - Session 1 - STG 32 | |||
Monday, March 17 - 9 a.m. to 5:25 p.m. This symposium contains technical papers that will focus on recent materials research and development, case studies, and testing in sour gas and petroleum production environments. Papers will include basic and applied research as well as failure analyses that address materials performance and advance the understanding of corrosion and environmental cracking processes and mechanisms. | |||
Chair: | Hisashi Amaya | ||
Vice Chair: | Julio G. Maldonado | ||
9:00 AM | Welcoming Remarks | ||
9:05 AM | 08084 | A New High Strength Corrosion Resistant Alloy for Oil and Gas Applications Sarwan K. Mannan, Shaelesh Patel | |
9:30 AM | 08085 | High Performance Corrosion Resistant Stainless Steels and Nickel Alloys for Oil & Gas Applications Dirk Aberle, Dinesh C. Agarwal | |
9:55 AM | 08086 | Balance of Alloying Elements in Wear Resistant Co-Based Alloys for Oil Drilling Applications Matthew X. Yao, James B. C. Wu | |
10:20 AM | Break | ||
10:30 AM | 08089 | Material Selection for Turnaround Wells: An Evaluation of The Impact Upon Downhole Materials, When Mixing Produced Water and Seawater Lucrezia Scoppio, Perry Ian Nice | |
10:55 AM | 08090 | Performance of Selected Corrosion Resistant Alloys Under Simulated Seawater Injection Conditions Downhole Robert D. Mack, John Carminati | |
11:20 AM | Intermission | ||
1:05 PM | 08091 | Performance of CRAs for Pressure Gauges in Sour Environments Günter Schmitt, Rolf Bloecher | |
1:30 PM | 08095 | Resistance of Dissimilar Joints Between Steel and Nickel Alloys to Hydrogen-Assisted Cracking Mike F. Gittos | |
1:55 PM | 08096 | Influence of Impact Angles on Mass Loss Rates of CRAs exposed to a High Velocity Multiphase Flow Joachim Haberl, Gregor K. Mori, Markus Oberndorfer, Wolfgang Havlik, Peter Hosemann, Marilyn Hawley, John Greg Swadener | |
2:20 PM | 08098 | Downhole CRA Materials Performance - Failure Analysis of a Sub Surface Safety Valve Jonathan Marsh | |
2:45 PM | 08099 | New Limits for Sulfide Stress Cracking in Deep Water Applications Russell D. Kane, Pilar Quiroga | |
3:10 PM | break | ||
3:20 PM | 08100 | Intergranular Stress Corrosion Cracking Susceptibility and Precipitation Behavior on Grain Boundary by Post Weld Heat Treatment of Super Martensitic Stainless Steels Hisashi Amaya, Kazuhiro Ogawa, Akira Taniyama, Masakatsu Ueda | |
3:45 PM | 08102 | Electrochemical Behavior of Low C - 13%Cr Welded Joints by Using Solution Flow Type Micro-Droplet Cell Shuji Hashizume, Toshiya Nakayama, Masatoshi Sakairi, Koji Fushimi | |
4:10 PM | 08104 | A Review of Laboratory Evaluation Procedures for Materials Selection in Downhole Applications Robert D. Mack | |
4:35 PM | 08107 | Sulfide Fracture Toughness of Low-alloy Steel OCTG in Mild Conditions at Room Temperature and at 40 F David L. Sponseller, Thomas E. Sponseller, Bruce E. Urband | |
5:00 PM | 08108 | Interpreting and Using the NACE Double Cantilever Beam (DCB) Test Karol E. Szklarz |
See more of Technical Symposium
See more of The CORROSION 2008 Conference and Expo (March 16-20, 2008)