START | BROWSE BY DAY or PROGRAM | AUTHOR INDEX

Internal Erosion/Erosion-Corrosion in Upstream Oil/Gas and Oil Sands Symposium - TEG 077X/TEG 341X

Thursday, March 18, 2010: 8:00 AM-11:15 AM
207 A/B (Henry B. Gonzales Convention Center)
Chair:
Dawn Eden
Vice Chair:
Wes McKinnon
8:00 AM
Introductory Remarks
8:05 AM
10138
Assessment of PTAW tungsten carbide-based overlays in an erosive-corrosive environment
Mark Jones* and Rees Llewellyn
National Research Council Canada
8:30 AM
10139
Using Effective Area Method with ILI data for Calculating Failure Pressure Can Reduce the ILI Measurement Uncertainty in the Resulting Calculated Failure Pressure
Havey Haines* and Dennis Johnston
Kiefner & Associates, Inc.
8:55 AM
10142
NEW SAND MANAGEMENT SYSTEM INTEGRATING EROSION BASED AND ACOUSTIC SENSORS IN NEW GENERATION MANAGEMENT SOFTWARE
Kjell Wold*1, Tommy Jakobsen1, Svein Erik Lilleland1, Sean Hopkins1, and Oystein Brandal2
(1)Roxar Flow Measurement AS; (2)StatoilHydro,
9:20 AM
Break
9:35 AM
10141
Corrosion Issues and Mitigation Strategies in Water Systems Relating to Oil Sands Operation (Mineable Extraction, Thermal Extraction and Raw Water)
Sally Hanearin*1, Jenny Been2, Edgar Boada3, Michael Boire4, Beth Daniel5, Wes McKinnon6, Budd Melvin7, and Ratna Ray8
(1)WorleyParsons Canada - Calgary; (2)Alberta Research Council; (3)3M Canada Company; (4)Independent Consultant; (5)Ammonite Corrosion Engineering Inc.; (6)Suncor Energy Inc.; (7)Ammonite Corrosion Engr Inc; (8)Consultant
10:00 AM
10140
Low angle scouring erosion behaviour of materials for processing and transportation of oil sands slurries
Lynsey C. Jones* and Rees Llewellyn
National Research Council Canada
10:25 AM
10143
Evaluating Corrosion and Inhibition under Sludge Deposits in Large Diameter Crude Oil Pipelines
Jenny Been*1, T.D. Place2, and Michael Holm3
(1)Alberta Research Council; (2)Enbridge Pipeline; (3)GE Water and Process Technologies
10:50 AM
10144
Degradations of Mechanical Properties in Surface Layer and Erosion Resistance of Carbon Steel in Slurries
Baotong Lu*1, Ke Wang1, Xuemei Wan2, and Jingli Luo1
(1)University of Alberta; (2)Department of Chemical and Materials Engineering
See more of: Technical Symposia
<< Previous Session | Next Session >>