START | BROWSE BY DAY or PROGRAM | AUTHOR INDEX

Research in Progress Session - Localized Corrosion

Monday, March 15, 2010: 8:55 AM-5:00 PM
212 A/B (Henry B. Gonzales Convention Center)
Chair:
Gerald Frankel
8:55 AM
Introductory Remarks
9:00 AM
The role of nanostructure in pitting of Al-Alloys
Nick Birbilis*
Monash University
9:30 AM
Prediction of pit-related damage accumulation in aluminum alloys using stochastic modeling
Nicolas Murer* and Rudolph G. Buchheit
Ohio State University
9:50 AM
Passivity and pitting corrosion of 3003 aluminum alloy in ethylene glycol-water solutions
Frank Y. Cheng*
University of Calgary
10:10 AM
The Study of Aerosol Corrosion Mechanism at the Tinplate-Liquid Interface
Wanlin Wang*
Central South University/Reckitt Benckiser
10:30 AM
Break
10:50 AM
Effects of Selected Water Chemistry Variables on Copper Pitting Propagation: Experiments and Modeling
Hongbo Cong1, Claes Taxen2, R. Verley3, and John R. Scully*3
(1)DNV Columbus; (2)KIMAB; (3)University of Virginia
11:20 AM
CORROSION SENSING BEHAVIOR OF ALUMINUM AND ALUMINUM ALLOYS COATED ON CNT-ENHANCED FIBERS
Yuhchae Yoon*, Lingchuan Li, Eunsung Shin, Khalid Lafdi, and Michael Bouchard
University of Dayton Research Institute
11:40 AM
Localized Corrosion Phenomena of Passive Materials in Geothermal Fluids
Helmuth Sarmiento Klapper*, Ralph Bäßler, and Andreas Burkert
Federal Institute for Materials Research and Testing (BAM)
12:00 PM
Lunch Break
1:30 PM
Metallurgical and environmental factors affecting the pitting behavior of SAF 2205 duplex stainless steel in chloride solutions
Hosni Zubeir*
College of Engineering,
1:50 PM
Intergranular Corrosion and Precipitation of Ti-stabilized low Cr Ferritic Stainless Steels
Jeong Kil Kim*1 and Kyoo Young Kim2
(1)POSCO; (2)Graduate Institute of Ferrous Technology (GIFT), POSTECH
2:10 PM
In-situ Determination of the Precursor Sites for Pitting Corrosion on Duplex Stainless Steels
Luis F. Garfias-Mesias*, Dong Liang, Hongbo Cong, and Haralampos Tsaprailis
DNV Columbus
2:30 PM
Dissolution and Repassivation of Freshly Bared Austenitic Stainless Steel Surfaces in Nitrate Solution
R. Scott Lillard*1, Gustavo J. Vasquez2, and David Bahr3
(1)Los Alamos National Laboratory; (2)Southwest Research Institute; (3)Washington State University
2:50 PM
Pitting Corrosion of SS304L in Droplets of MgCl2 Solution
Bastian Maier* and Gerald Frankel
Fontana Corrosion Center, The Ohio State University
3:10 PM
Break
3:20 PM
The Role of Coincident Site Lattice Sigma-3 Grain Boundaries in the Crevice Corrosion Resistance of Alloy-22
Pellum Jakupi, James J. Noël*, and David W. Shoesmith
Department of Chemistry, The University of Western Ontario
3:40 PM
Insights into Mechanisms Controlling the Location of Crevice Attack
Jason S. Lee*
US Naval Research Lab
4:00 PM
A Novel Model for the Crevice Corrosion of Zirconium in Water-Deficient Organics
Te-Lin Yau*
Te-Lin Yau Consultancy
4:20 PM
Sulfide and Chloride Stress Corrosion Cracking Mitigation Using Low Plasticity Burnishing
Jeremy E. Scheel*1, Kenneth Darrel Chelette Jr.2, and P. W. Moore2
(1)Lambda Technologies Inc.; (2)US Steel Tubular Products Inc.
See more of: Research in Progress
<< Previous Session | Next Session >>