CORROSION 2010 (March 14 – 18, 2010): Research in Progress Session

7:55 AM

8:00 AM

Similarities and Differences Between Dealloying and Alloying-induced Passivity, and Current Modeling Challenges
Roger C. Newman^* and Dorota M. Artymowicz
University of Toronto

8:30 AM

Characterization of Films Grown on 316L Stainless Steel by Pulsed Polarization in Sulfuric Acid
Julia Doff^*¹, Peter Skeldon¹, Elena Koroleva¹, George Thompson¹, and Gordon Jones²
(1)The University of Manchester; (2)Waters Corporation

8:50 AM

Influencing passivity breakdown resistance of ultra-thin oxides on alloy surfaces through photo-excitation
Chia-Lin Chang^*¹, Mark H. Engelhard², and Shriram Ramanathan¹
(1)Harvard University; (2)Pacific Northwest National Laboratory

9:10 AM

Influence of Temperature, pH value and Sulfur Ions on Electronic Properties of Passive Films on CuZnFe Alloy in 1MNaHCO3/0.5MNa2CO3 Buffer Solution
D. G. Li D. G. Li Sr.^*
Tsinghua University

9:30 AM

Characterization of the Films on Alloys in High Temperature and High Pressure Water
En-Hou Han^*, Xinqiang Wu, and Jianqiu Wang
Institute of Metal Research, Chinese Academy of Sciences

9:50 AM

Break

10:10 AM

Effects of Passivation Environments on the Composition and Electronic Properties of the Passive Film on Alloy 690
HeeJin Jang^*¹ and HyukSang Kwon²
(1)Chosun University; (2)Korea Advanced Institute of Science and Technology

10:30 AM

Characterization of passive film formed on nickel base alloys in PWR primary water simulated conditions
Loic Marchetti¹, Stephane Perrin^*¹, Michele Pijolat², Mohamed Sennour³, Regine Molins³, Yves Wouters⁴, Helene Lefaix¹, and Frederic Miserque¹
(1)CEA; (2)EMSE; (3)MINES, ParisTech; (4)SIMaP

11:30 AM

Whitney Award Lecture

12:15 PM

Lunch Break

2:00 PM

SURFACE FILMS FORMED ON NI-CR-FE ALLOYS INCLUDING ALLOY 600 AND ALLOY 690 IN PWR PRIMARY WATER AT 300°C
Thomas M. Devine^* and Feng Wang
Univ of California Berkeley

2:20 PM

Effect of Water Chemistry on 304 SS Oxide in high Temperature Water
Young-Jin Kim^*
GE Global Research Center

2:40 PM

CHARACTERIZATION OF PASSIVE LAYERS ON STEEL SURFACES IN SODIUM CHLORIDE SOLUTIONS
Vesna B. Miskovic-Stankovic^*¹, Jovan Popic², Jelena Bajat¹, Bore Jegdic³, Jiabin Han⁴, David Young⁴, Bruce Brown⁴, and Srdjan Nesic⁴
(1)Faculty of Technology and Metallurgy, University of Belgrade; (2)ICTM – Department of Electrochemistry, University of Belgrade; (3)Institute Gosa; (4)Institute for Corrosion and Multiphase Technology, Ohio University

3:00 PM

FILM BREAKDOWN OF CARBON STEEL IN BIO-ETHANOL DURING STRESS CORROSION CRACKING
Xiaoyuan Lou^* and Preet M. Singh
School of Materials Science and Engineering, Georgia Institute of Technology

3:20 PM

Break

3:40 PM

Corrosion product characterization and surface analysis of Zn-Al-Mg coated steel
Susanne Schuerz^*¹, Martin Fleischanderl², Gerald H. Luckeneder², Paul Mack³, and Gregor Mori¹
(1)Christian Doppler Laboratory of Localized Corrosion, University of Leoben; (2)voestalpine Stahl GmbH; (3)Thermo Fisher Scientific

4:00 PM

Corrosion Resistance of Chromium-Free Conversion Layers on Hot Dip Galvanized Steel
Gerald Reiter^*¹, Martin Fleischanderl², Christian Commenda², and Günter Fafilek¹
(1)CEST, Competence Centre for Electrochemical Surface Technology; (2)Voestalpine

4:20 PM

Investigation the effect of passivation on corrosion behavior of carbon steel via Electrochemical Noise and Polarization methods
Sadaf Tahmasebi^* and Mohammad Reza Mohammad Zadeh Attar
Polymer Engineering Department, Amir Kabir University, Tehran, Iran

4:40 PM

INVESTIGATING THE EFFECT OF CHEMICAL TREATMENTS ON CORROSION BEHAVIOR OF CARBON STEEL VIA ELECTROCHEMICAL NOISE AND POLARIZATION METHODS
Sadaf Tahmasebi^* and Mohammad Reza Mohammad Zade Attar
Polymer Engineering Department, Amir Kabir University, Tehran, Iran

Research in Progress Session - Passive Films