Corrosion in Nuclear Symposium (Session II)

Thursday, March 18, 2010: 8:00 AM-12:05 PM
212 A/B (Henry B. Gonzales Convention Center)
Chair:
Xihua He
Vice Chair:
Fred Hua
8:30 AM
Atmospheric Salt Fog Testing to Evaluate Chloride Induced Stress Corrosion Cracking of Type 304, 304L, and 316L Stainless Steel
Todd S. Mintz1, Leonardo Caseres*1, Darrell Dunn2, and Mekonen Bayssie2
(1)Southwest Research Institute; (2)U.S. Nuclear Regulatory Commission
8:55 AM
Temperature Dependence of Oxide Film Thickness of Ni-based alloy in Deaerated High-Temperature Water
Takumi Terachi*1, Tomoki Miyamoto1, Takuyo Yamada1, Nobuo Totsuka1, Kiyotomo Nakata2, and Kenichi Takakura2
(1)Institute of Nuclear Safety System, Incorporated; (2)Japan Nuclear Energy Safety Organization
9:20 AM
9:35 AM
Influence of Zirconium Alloy Strength on SCC Susceptibility of Cladding Tubes
Sergey A. Nikulin*1, Vladislav G. Khanzhin1, Andrey B. Rozhnov1, Vladislav A. Belov1, Elina V. Li2, and Maria V. Koteneva2
(1)State Technological University "Moscow Institute of Steel and Alloys" (MISIS); (2)State Technological University
10:00 AM
Effects of cold work on the corrosion susceptibility of Steam Generator tubing alloy
Renkang Zhu1, Baotong Lu*2, Jingli Luo2, and Yucheng Lu3
(1)Department of Chemical and Materials Engineering University of Alberta; (2)University of Alberta; (3)Atomic Energy of Canada Ltd.
10:25 AM
10:50 AM
Effects of Electropolishing and Thermal Annealing on Corrosion/Release Behavior of NiCrFe Alloy 690
J. T. Orr*, S. E. Ziemniak, B. B. Penney, P. C. Sander, and M. E. Hanson
Bechtel Marine Propulsion Corporation
11:15 AM
UREX+ Centrifugal Contactor Corrosion in HNO3-HF Aqueous Solutions
Negin Jahangiri*1, A.G. Raraz1, J.E. Indacochea1, and S.M. McDeavitt2
(1)University of Illinois at Chicago - Materials Engineering; (2)Nuclear Engineering Department, Texas A&M University
11:40 AM
UREX+ 304L Stainless Steel Centrifugal Contactor Corrosion due to Hydrodynamic Effects
S. Dasari*1, A.G. Raraz1, J.E. Indacochea1, and Sean M. McDeavitt2
(1)University of Illinois at Chicago - Materials Engineering; (2)Texas A&M University
See more of: Technical Symposia