Wednesday, October 8, 2008: 1:00 PM-4:50 PM
Virginia City II (Flamingo Las Vegas)
Chair:
Rudolph G. Buchheit
Vice Chair:
Nicholas Murer, Dr.
1:00 PM
EIS Analysis of Fluorocarbon Anticorrosion Coating After Artificially Accelerated Aging
Prof. Jin Gao, Materials Science and Engineering School, University of Science and Technology Beijing;
Wenjuan Yuan, School of Materials Science & engineering,University of Science & Technology Beijing;
Xiaogang Li, School of Materials Science & engineering,University of Science & Technology Beijing;
Li Yingchao, School of Materials Science & engineering,University of Science & Technology Beijing
1:25 PM
Analysis on Deposition Behavior and Properties of NiCoCrAlY +ZrO2 Coating by Cold Spraying
Dr. Xiangbo Li, State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI);
Jing Wang, State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI);
Guosheng Huang, State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI)
1:50 PM
Development and Validation of a Fast Scanning Technique for Corrosion Inhibitor Selection
Dr. S.J. García, Delft University of Technology;
Dr. T.H. Muster, CSIRO Materials Science & Engineering;
Dr. J.M.C Mol, Delft University of Technology;
Dr. A.E. Hughes, CSIRO Materials Science & Engineering;
T. Harvey, CSIRO Materials Science & Engineering;
N. Sherman, CSIRO Materials Science & Engineering;
S. Hardin, CSIRO Materials Science & Engineering;
P. Corrigan, CSIRO Materials Science & Engineering;
D. Lau, CSIRO Materials Science & Engineering;
P. A. White, CSIRO Materials Science & Engineering;
M. Glenn, CSIRO Materials Science & Engineering;
J. Mardel, CSIRO Materials Science & Engineering;
Prof. Dr. H. Terryn, Vrij Universiteit Brussel;
Prof. Dr. J.H.W. De Wit, Delft University of Technology
2:40 PM
A Comparative Study of Accelerated Weathering Tests for Organic Coatings
Jianwen Hu, Materials Science and Engineering School, University of Science and Technology Beijing;
Prof. Jin Gao, Materials Science and Engineering School, University of Science and Technology Beijing;
Prof. Xiaogang Li, Materials Science and Engineering School, University of Science and Technology Beijing;
Quanlin Zhao, Materials Science and Engineering School, University of Science and Technology Beijing