Corrosion in Nuclear Systems - TEG 224X (Session I)

Wednesday, March 16, 2011: 7:55 AM-2:45 PM
Room 351 E (George R. Brown Convention Center)
Tiangan Lian
Vice Chair:
Raul B. Rebak
8:25 AM
A New Improved Nickel-Based Weld Filler Metal for Use in Nuclear Power Plant Construction
Larry D. Paul*1 and George A. Young2
(1)Thyssen Krupp VDM USA Inc; (2)Lockheed Martin
9:15 AM
Corrosion of Low Carbon Steel in High Concentration Nitrate Solutions
Bruce J. Wiersma*, John I. Mickalonis, and Brenda L. Garcia-Diaz
Savannah River National Laboratory
9:40 AM
9:55 AM
Inhibition Effect of Phosphate Ions on Crevice Corrosion of Alloy 22
Marcela Miyagusuku*1, Ricardo M. Carranza2, and Raul B. Rebak3
(1)Comisión Nacional de Energía Atómica; (2)Comision Nacional de Energia Atomica and Instituto Sabato (UNSAM-CNEA); (3)GE Global Research
10:45 AM
Efficiency of Inhibitors of Chloride-Induced Crevice Corrosion of a Ni-Cr-Mo Alloy
Mauricio Rincón Ortíz1, Martín A. Rodríguez2, Ricardo M. Carranza3, and Raul B. Rebak*4
(1)Instituto Sabato - Centro Atómico Constituyentes - CNEA; (2)Comisión Nacional de Energía Atómica and Instituto Sabato (UNSAM-CNEA); (3)Comision Nacional de Energia Atomica and Instituto Sabato (UNSAM-CNEA); (4)GE Global Research
11:10 AM
Electrochemical Properties of Spark Plasma Sintered Tungsten
Kerry N. Allahar*1, Jon A. Webb2, Darryl P. Butt1, and Indrajit Charit2
(1)Boise State University; (2)University of Idaho
12:00 PM
The Relationship Between Cathodic Current in Rapid Straining Electrode Test and PWSCC Crack Growth Rate of Nickel Based Alloys Under Simulated Primary Water Condition
Nobuo Totsuka*1, Takumi Terachi1, and Kenichi Takakura2
(1)Institute of Nuclear Safety System, Incorporated; (2)Japan Nuclear Energy Safety Organization
12:25 PM
1:55 PM
The Effects of Deaerated Water on the Toughness of Nickel-Based Alloys
Edward Richey*
Bechtel Marine Propulsion Corporation
2:20 PM
Passivity of Nuclear Steam Generator Tube Alloy in Lead-Contaminated Crevice Chemistries with Different pH
Baotong Lu*1, Jingli Luo2, and Yucheng Lu3
(1)Southwest Research Institute; (2)Department of Chemical and Materials Engineering, University of Alberta; (3)Atomic Energy of Canada Ltd.
See more of: Technical Symposium