Fluid-Induced Degradation--Corrosion , Erosion, and Their Interactions - TEG 213X

Monday, March 14, 2011: 8:55 AM-3:45 PM
Room 352 D (George R. Brown Convention Center)
Hernan E. Rincon
Vice Chair:
Ian J. Rippon
9:00 AM
Integrity of Corrosion Inhibitor Films in Multiphase Flow
Christian Canto*1, Bruce Brown2, and Srdjan Nesic1
(1)Ohio University; (2)Institute for Corrosion and Multiphase Technology, Ohio University
9:25 AM
Predicting the Performance of API 5L-X65 in CO2 Erosion-Corrosion Environments Using Design of Experiments
Khaled Alzawai*1, Xinming Hu1, Anne Neville1, Rupesh Roshan1, Crossland A. Crossland Sr.2, and Martin J. Martin2
(1)University of Leeds; (2)BP
9:50 AM
Flow-Induced Corrosion and Erosion-Corrosion Assessment of Carbon Steel Pipework in Oil and Gas Production
Richard Barker*1, Anne Neville1, Xinming Hu1, and Susan Cushnaghan2
(1)University of Leeds; (2)Shell UK Limited
10:15 AM
Electrochemical Characterization of Erosion-Corrosion of X70 Pipeline Steel Under Jet Impingement Conditions
Xuehua Fan1, Wei Liu*1, Feng Cai1, Hong Guo2, Yuliang WU1, Qing Du3, and Minxu Lu1
(1)Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Sciences and Technology Beijing; (2)CNOOC Research Institute; (3)State Key Laboratory for Advanced Metals and Materials, University of Science & Technology Beijing
10:40 AM
10:55 AM
Corrosion of Carbon Steel in High CO2 Environment: Flow Effect
Azmi Mohammed Nor*1, M F Mohamed1, M. F. Suhor1, M Singer1, Srdjan Nesic1, and Saadan Mat2
(1)Ohio University; (2)PETRONAS Research
11:20 AM
Application of Coupled Electrochemistry/Oxide-Layer-Growth Model to Water Chemistry Improvement against Flow Accelerated Corrosion in PWR Secondary System
Shunsuke Uchida*1, Masanori Naitoh1, Hidetoshi Okada1, Seiichi Koshizuka2, Derek H. Lister3, and Taku Ohira4
(1)The Institute of Applied Energy; (2)University of Tokyo; (3)University of New Brunswick; (4)Japan Atomic Power Co.
11:45 AM
Flow Loop Study of Chloride Concentration Effect on Erosion, Corrosion and Erosion-Corrosion of Carbon Steel in CO2 Saturated Systems
Shokrollah Hassani*1, Kenneth P. Roberts1, Siamack A. Shirazi1, John R. Shadley2, Edmund F. Rybicki1, and Carlos J. B. de M. Joia Sr.3
(1)Erosion-Corrosion Research Center, The University of Tulsa; (2)Erosion/Corrosion Research Center, The University of Tulsa; (3)PETROBRAS SA
12:10 PM
1:00 PM
Electrochemical and Microstructural Response of Metal Matrix Composites Under Different Erosion-Corrosion Conditions
J. F. Flores*, A. Neville, N. Kapur, and A. Gnanavelu
Institute of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds, Leeds, UK
1:25 PM
Predicting Sand Erosion in Slug Flows Using a Two-Dimensional Mechanistic Model
Yongli Zhang*, Brenton S. McLaury, Siamack A. Shirazi, and Edmund F. Rybicki
Erosion-Corrosion Research Center, The University of Tulsa
1:50 PM
Choosing Better API RP 14E C Factors for Practical Oilfield Implementation
Ronnie Russell*, Hang Nguyen, and Kai Sun
Baker Hughes Incorporated
2:15 PM
2:30 PM
Erosion-Corrosion Failures in Wellhead Chokes
Gladys Navas*1 and Ioana Cristina Grigorescu2
(1)IUTEC; (2)Universidad Simon Bolivar
3:20 PM
Damage Mechanisms in Double-Screw Pumps for Heavy Crude Oil
Ioana Cristina Grigorescu*1, Gladys Navas2, and Medardo A. Camacaro3
(1)Universidad Simon Bolivar; (2)IUTEC; (3)Universidad de Oriente
See more of: Technical Symposium