Advanced Experimental Techniques in Corrosion Research

Tuesday, March 15, 2011: 7:55 AM-6:30 PM
Room 350 E (George R. Brown Convention Center)
Geraint Williams
Vice Chair:
T.H. Muster
8:00 AM
Submicrometer Surface Reactivity Investigation by Scanning Kelvin Probe Force and Nanocapillary Methods
Patrik Schmutz*, J. Lübben, O. Guseva, and T. Suter
Swiss Federal Laboratories for Materials Science and Technology
8:25 AM
Local Potential Measurements with the SKPFM on Wrought Magnesium Alloys
Guy Ben-Hamu*
Department of Mechanical Engineering, Sami Shamoon College of Engineering
8:45 AM
Calibration of the Scanning Kelvin Probe Force Microscope for In-Situ Corrosion Monitoring via the Scanning Kelvin Probe Technique
Anthony B. Cook*1, Stuart Lyon1, John Walton1, Hamilton N. McMurray2, Zak Barret2, and Geraint Williams2
(1)The University of Manchester; (2)University of Wales, Swansea
9:25 AM
9:40 AM
Multielectrode Arrays for Studying the Kinetics of Atmospheric Corrosion
T.H. Muster*
CSIRO Materials Science & Engineering
10:00 AM
In-Situ Monitoring of Pit Growth and the Effect of Inhibitor Under Sweet Conditions
Ismarullizam Mohd Ismail*1, Anne Neville1, Xinming Hu1, and Jeremy J. Moloney2
(1)University of Leeds; (2)Baker Hughes Incorporated
10:20 AM
New Methods for Determination of Coating Adhesion and Adhesion Degradation
Gerald Frankel*, Saikat Adhikari, Brendy Rincon-Troconis, and Jinwook Seong
Fontana Corrosion Center, The Ohio State University
1:00 PM
In-Situ Electromagnetic Hydrogen Sensors to Predict Stress Corrosion Cracking in Metals
Angelique N. Lasseigne*1, Kamalu M. Koenig1, Joshua E. Jackson1, and J. David McColskey2
(1)Generation 2 Materials Technology, LLC; (2)National Institute of Standards and Technology
1:20 PM
Thermal Desorption Behavior of Hydrogen
Eitan Dabah*1, Thomas Kannengiesser1, Thomas Boellinghaus1, and Dan Eliezer2
(1)Federal Insitute for Material Research and Testing; (2)Ben Gurion Univesity of the Negev, Department of Material Engineering
1:40 PM
Using EQCM to Examine Kinetics Models Ferrous Carbonate Precipitation in CO2 Corrosion of Mild Steel
Yang Yang*1, Richard C. Woollam2, and Srdjan Nesic3
(1)Institute for Corrosion and Multiphase and Technology, Department of Chemical and Biomolecular Engineering, Ohio University; (2)BP America Inc; (3)Ohio University
2:00 PM
Effect of Carbon Dioxide on Corrosion Behaviors of Tubular Steel in Buffered Acidic 5%NaCl Solutions with Hydrogen Sulfide and Carbon Dioxide
Hongda Deng Sr.*1, Chunfu Li Sr.2, and Xianlong Cao1
(1)School of Metallurgical and Materials Engineering, Chongqing University of Science and Technology; (2)State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University
2:20 PM
Corrosion Rate of Zinc and Driving Mechanism in Different Concentrations of Saline Aqueous Solutions
Khalil Khan*, James Sullivan, and H.Neil McMurray
Swansea Univeristy
2:40 PM
3:00 PM
3:15 PM
Influence of Silica and Silicate Species on the Green Rust I (Cl-) Transformation
Gadadhar Sahoo*, Shun Fujieda, Kozo Shinoda, and Shigeru Suzuki
Institute of Multidisciplinary Research For Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Japan
3:35 PM
Using the Metabolome to Identify Microbial Influenced Corrosion in Copper Pipes
David J. Beale*1, Michael S. Dunn2, and Donavon Marney1
(1)Commonwealth Scientific and Industrial Research Organisation (CSIRO); (2)RMIT University
4:15 PM
Fatigue and SCC Lifetime Enhancement of Metals by Means of Laser Peening
James Harrison*1 and Lloyd Hackel2
(1)Metal Improvement Co.; (2)Metal Improvements Company
4:35 PM
5:30 PM
Microcomposite Cermet Coating for DoD Hard Chrome Replacement
James Chew*, Curt Glasgow, and Greg Engleman
Mesocoat Inc
5:50 PM
Stray Current Control in DC Mass Transit Systems with Cathodic Protection
Shayan Medhat*
Science and Reaserch University of Tehran
6:10 PM
Electrochemical Effect of Chain Length on Corrosion Inhibition Effect of Cationic Single Chain and Gemini Surfactants
Dourna Asefi*1, Mokhtar Arami2, and Niyaz Mohammad Mahmoodi3
(1)Azad Universuty South Brach of Tehran; (2)Amirkabir University of Technology, Textile Department; (3)Department of Environmental Research, Institute for Colorants, Paint and Coatings
See more of: Research in Progress