Recent Experience with Corrosion-Resistant Materials - STG 39

Wednesday, March 16, 2011: 7:55 AM-2:20 PM
Room 320 B (George R. Brown Convention Center)
Chair:
Helena Alves
Vice Chair:
Ruben Muro
8:50 AM
Recent Experience with Stainless Steels in FGD Air Pollution Control Service
Lewis Shoemaker1, James R. Crum1, Debajyoti Maitra*1, Ruben Muro2, and Marlena Neighbor2
(1)Special Metals Corp; (2)Corrosion Materials
9:15 AM
Evaluation of Suitability of Some High Alloyed Materials for Geothermal Applications
Helmuth Sarmiento Klapper*1, Ralph Bäßler2, Henrik Asteman3, and Ali Saadat4
(1)Baker Hughes; (2)BAM - Federal Institute for Materials Research and Testing; (3)Schmidt + Clemens GmbH + Co. KG; (4)GeoForschungsZentrum
9:40 AM
9:55 AM
Rolled Lined Corrosion Resistant Steel Pipes in Geothermal Environment: Investigation and Results of Field Tests
George Furmanski1, Ulrich Schnaut*2, Kam Dianatkhah1, and Bernd Berg3
(1)CalEnergy; (2)Bergrohr GmbH; (3)Bergrohr GmbH Siegen
10:20 AM
Corrosion Properties of Different Highly Alloyed Clad Materials for Offshore Applications Manufactured by a New Thermo-Mechanical Rolling Process
Manuel Prohaska*1, Gregor Mori1, Herbert Hofstätter2, Guido Tischler3, and Rainer Grill3
(1)Christian Doppler Laboratory of Localized Corrosion, University of Leoben; (2)Chair of Petroleum Production and Processing, University of Leoben; (3)voestalpine Grobblech GmbH
10:45 AM
Corrosion Behavior of Duplex Stainless Steels in Arabian Seawater
A. U. Malik1, Mohammad Mobin*2, Fahd Al-Muaili1, and Saleh Al-Fozan1
(1)Saline Water Desalination Research Institute, Saline Water Conversion Corporation; (2)DEPARTMENT OF APPLIED CHEMISTRY, FACULTY OF ENGINEERING AND TECHNOLOGY
11:10 AM
Effect of Sigma Phase on the Corrosion and Stress Corrosion of 2205 and 2507 Duplex Stainless Steels
Sudhakar P. Mahajanam*1, Raymundo P. Case1, Hernan E. Rincon1, Dale R. McIntyre1, Michael W. Joosten1, Henning Monsen2, and Stig Gjesdal2
(1)ConocoPhillips; (2)ConocoPhillips Norway
11:35 AM
Chloride Limits for Pitting and Cracking of 300 Stainless Steels Series on an Acid Gas Removal Plant
Hernan E. Rincon*1, Raymundo P. Case1, Dale R. McIntyre1, and Shanen R. Hernandez2
(1)ConocoPhillips Company, Production Assurance Technology; (2)Conoco Phillips Company, LCGP
12:00 PM
Influencing the Functional Properties of Stainless Steels by Different Surface Treatments
Thomas L. Ladwein*, Matthias Sorg, Sebastian Schilling, and Sibylle Schilling
Aalen University of Applied Sciences
12:25 PM
See more of: Technical Symposium