START
|
BROWSE BY DAY
or
PROGRAM
|
AUTHOR INDEX
Author Index: F
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Fan, H.
Progress on Corrision Tests for Carbon Steel in the Typical Soil Environment in China
Fang, H.
Elemental Sulfur Corrosion of Mild Steel at High Concentrations of Sodium Chloride
Fang, J.
Effects of pH and Potential on Stress Corrosion Cracking Behaviors of Pipeline Steels
Farias, Sr., D.
Influence of Microstructure on the Corrosion Performance of Dual Phase Steels
Fedel, M.
Environmentally Friendly Protective Cycles for Aluminum Components for Marine Applications
Fedkin, M. V.
Electrochemical Corrosion Measurements in High Temperature Boiler Water
Fedrizzi, L.
Corrosion Protection of Aluminium Alloys Using Thin ZrO2 Coatings Deposited with Sol-Gel Technique
Localized Corrosion Behavior of Welded Pipes for Fresh Water Systems in the Shipbuilding Industry
Feliu, Jr., S.
Cerium Doped Hybrid Silica Sol-Gel Coatings with Self-Healing Properties for Corrosion Protection of Mild Steel
Feng, Y.
Research and Application of 2205 Duplex Stainless Steel for the Gathering Pipelines in Kela-2 Gas Field
Fernandes, J.
Development of Sensors for Early Detection of Aluminum Corrosion in Airframe Structures
Inherently Conducting Polymers on Aluminium Alloy 6061-T6 by Electropolymerization
Feron, D.
Materials and Corrosion Challenges in Nuclear Fields
Ferreira, M. G.
Application of SVET/SIET Techniques to Study Healing Processes in Corroding Micro-confined Defects
Inhibitor-Doped Hybrid Sol-Gel Films as Pre-Treatment for Aluminium Alloys
Inherently Conducting Polymers on Aluminium Alloy 6061-T6 by Electropolymerization
Fisher, G.
Erosion-Corrosion Testing of Materials in the Prediction of Wear of Hydrotransport Pipelines in Oil Sands Slurries
Fleming, D.
A Multi-Stress Screen for Corrosion-Susceptible Chip Resistors
Protection and Preservation of Corrosion Sensitive Materials
Flores, J. F.
An Integrated Methodology for Predicting Material Wear Rates Due to Erosion-Corrosion
Corrosion and Erosion-Corrosion of PTA Overlays for Applications as Matrix Materials of MMCs
Fluch, R.
Corrosion Fatigue and Cold Deformation of a CrMnN Stainless Steel
Flyg, J.
MATERIALS PERFORMANCE IN CEMENT KILN ENVIRONMENT - FIELD AND LABORATORY TESTING
Foax, L. J.
Atmospheric Corrosion Effects of Air Pollution on Materials and Cultural Property in Asia and Africa
Effectiveness of Using Pure Copper and Silver Coupon Corrosivity Monitoring (CCM) Metal Strips to Measure the Severity Levels of Air Pollutants in Indoor and Outdoor Atmospheres
Fojt, J.
Corrosion Behavior of Titanium-Molybdenum Alloys for Dentistry
Forchelet, J.
Online and Real-time Monitoring of Corrosion Rates of Stainless Steel, Low Carbon Steel and Copper in CO2 Hydrate Slurry with Coupled Multielectrode Array Sensors
Forsén, O. B. W.
Corrosion of Copper in Gas Phase in the Final Disposal of Spent Nuclear Fuel
The Use of Laboratory Exercises in Education of Corrosion Engineers
Fort, III, W.
The Future of Energy - The Challenge for Materials
Fox, P.
Oil and Gas Well Casing Inspection in Four Dimensions
Franey, J.
A Multi-Stress Screen for Corrosion-Susceptible Chip Resistors
Protection and Preservation of Corrosion Sensitive Materials
Frankel, G.
Chromate-Free Surface Treatments for Al Alloy and Steel Substrates
Frisch, G.
Oil and Gas Well Casing Inspection in Four Dimensions
Fristad, W.
Chromate-Free Surface Treatments for Al Alloy and Steel Substrates
Fujii, K.
Corrosion Potential Evaluation and Materials Selection for Wet Electrostatic Precipitator Applied for SO
3
Mist Removal
Fumita, M.
A Risk Estimation for Chemical Plants Considering Domino Effects Based on Disaster Simulation
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z