START
|
BROWSE BY DAY
or
PROGRAM
|
AUTHOR INDEX
Author Index: K
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Kain, V.
Effect of Low Temperature Sensitization on IGSCC Behavior of Type 304L and Type 304LN SS in Oxygenated High Temperature Water
Kalabisova, E.
The Influence of Antibiotics and Gelatine on Corrosion Behavior of ISO 5832-1, ISO 5832-9 and ISO 5832-12
Kalabisová, E.
Influence of Concrete Properties and Rebar Distribution on Measurements of Corrosion Rates of Embedded Steel
Kálmán, E.
Nanolayers Against Microbial Adhesion
Kang, C.
Effect of Flow on Erosion-Corrosion at Extreme Gas Flow Rate and the Performance of Inhibitor
Kanukuntla, V.
Experimental Study of Concurrent Naphthenic Acid and Sulfidation Corrosion
Kapur, N.
An Integrated Methodology for Predicting Material Wear Rates Due to Erosion-Corrosion
Corrosion and Erosion-Corrosion of PTA Overlays for Applications as Matrix Materials of MMCs
Kapusta, S.
The Future of Energy - The Challenge for Materials
Karavai, O. V.
Application of SVET/SIET Techniques to Study Healing Processes in Corroding Micro-confined Defects
Kasisomayajula, S.
A Polypyrrole Composite Pigment for Corrosion Inhibition on Aluminum 2024
Kato, C.
Characteristics of Intergranular Corrosion of Stainless Steel in the Simulation Test for Nuclear Fuel Reprocessing Plant
Kawano, K.
Monitoring of CUI (Corrosion Under Insulation) by ACM (Atmospheric Corrosion Monitor) Sensor
Investigation of Titanium Corrosion in Sour Water Stripper Overhead Streams
Ke, W.
Study of Stress Corrosion Cracking of X70 Pipeline Steel in Near Neutral pH Solution
Synergistic Effect of Cu and Ni on Atmospheric Corrosion Resistance for Low-alloying Steel in Wet/Dry Cyclic Industrial Environments
SCC Environment under Simulated Disbonded Coating on Buried Pipelines
Kehr, J. A.
Critical Evaluation of International Cathodic Disbondment Test Methods
Kelly, R. G.
University of Virginia, USA
Kessler, R. J.
Corrosion of Epoxy-Coated Rebar in Marine Bridges - a 30 Year Perspective
Kiel, D.
Erosion-Corrosion Testing of Materials in the Prediction of Wear of Hydrotransport Pipelines in Oil Sands Slurries
Kim, B. M.
Unexpected Corrosion in Sour Water Withdrawal Line
Case Study of CP Effect on the Bottom Plate of Aboveground Storage Tank
Kim, D. H.
Effect of Y and La Addition on the Oxidation Behavior and Cr Evaporation
Kim, D. J.
Application of Ni-plating to Prevent Steam Generator Tubing from SCC in Nuclear Power Plants
Kim, G. T.
Unexpected Corrosion in Sour Water Withdrawal Line
Case Study of CP Effect on the Bottom Plate of Aboveground Storage Tank
Kim, H.
Effect of the Chloride Content on the Corrosion Properties of the Stainless Steels in Potable Water Environments
Kim, H. P.
Application of Ni-plating to Prevent Steam Generator Tubing from SCC in Nuclear Power Plants
Kim, J. S.
Application of Ni-plating to Prevent Steam Generator Tubing from SCC in Nuclear Power Plants
Kim, K. Y.
Effect of Y and La Addition on the Oxidation Behavior and Cr Evaporation
Kim, M. J.
Application of Ni-plating to Prevent Steam Generator Tubing from SCC in Nuclear Power Plants
Kim, P. Y.
Case Study of CP Effect on the Bottom Plate of Aboveground Storage Tank
Kim, Y. H.
Effect of the Chloride Content on the Corrosion Properties of the Stainless Steels in Potable Water Environments
Kim, Y.
Characterization of General and Localized Corrosion Resistance of Several Titanium Alloys in High Temperature Brines
Kimler, J.
Formulated Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC), a Multi-Metal Corrosion Inhibitor with Relevance to Commercial Surface Preparation and Coatings Technologies
Kinsella, B.
Cathodic Mass Transfer Relationship of Carbonic Acid Solutions with Trace Dissilved Oxygen Contamination
Galvanic Corrosion of Carbon Steel in Carbon Dioxide Caused by Magnetite
Kleber, C.
The Influence of Aerial Oxygen on the Interaction of Polycrystalline Silver Surfaces with SO
2
Containing Humidified Air
Knudsen, O. Ř.
Critical Evaluation of International Cathodic Disbondment Test Methods
Koch, C. C.
Low Temperature Oxidation of Nanocrystalline Vis-à-Vis Microcrystalline Fe-Cr Alloys
Koleva, D. A.
Conventional Monitoring and Fundamental Electrochemical Methods for Establishing the Efficiency of an Alternative Cathodic Protection for Reinforced Concrete
Pulse Technology as a Solution for Overcoming Some Side Effects of Cathodic Protection for Reinforced Concrete
Kouřil, M.
Significance of Steel Cathodic Passivation in Corrosion
Kouril, M.
Impact of Scaling on Corrosion of Stainless Steels in Carbonated and Chloride Containing Concrete
Kranc, S.
Modeling of Corrosion of Steel in Concrete with Potential-Dependent Chloride Threshold
Kuang, F.
Study on Cathodic Oxygen Reduction in 3.5% NaCl Solution by Electrochemical Impedance Spectroscopy
Kucera, V.
Development of Atmospheric Corrosion in the Changing Pollution and Climate Situation
Kucera, V.
Atmospheric Corrosion Effects of Air Pollution on Materials and Cultural Property in Asia and Africa
Kurashiki, T.
A Risk Estimation for Chemical Plants Considering Domino Effects Based on Disaster Simulation
Kutelia, E. R.
On the Role of Entropy-“Excited” Surface Layers in the Formation of High Temperature Corrosion Resistant Barrier Oxide Scale on Fe-Cr-Al-La Alloy
Kuwaki, N.
Atmospheric Corrosion of Copper in an Indoor Environment with a High H
2
S Concentration
Kuylenstierna, J.
Atmospheric Corrosion Effects of Air Pollution on Materials and Cultural Property in Asia and Africa
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z