START | BROWSE BY DAY or PROGRAM | AUTHOR INDEX

Environmentally Assisted Cracking - TEG 186X

Tuesday, March 15, 2011: 7:55 AM-5:00 PM
Room 351 C (George R. Brown Convention Center)
Chair:
Noam Eliaz
Vice Chair:
Jenny Been
7:55 AM
Introductory Remarks
8:00 AM
11283
Engineered Residual Stress to Mitigate Stress Corrosion Cracking of Stainless
Jeremy E. Scheel*, N. Jayaraman, and Doug Hornbach
Lambda Technologies Inc.
8:25 AM
11284
Stress Corrosion Cracking of Sensitized AA5083 in NaCl Solution
Jie Gao* and David J. Quesnel
University of Rochester
8:50 AM
11285
Effect of Electrolyte Composition on Near-Neutral pH Stress Corrosion Crack Propagation
Andrey Marshakov*1, Roman Bogdanov1, Vasily Ignatenko1, Tatjana Nenasheva1, and Andrey Arabey2
(1)Institute of Physical Chemistry and Electrochemistry of Russian Academy of Sciences; (2)OAO Gazprom
9:15 AM
Break
9:30 AM
11286
Near-Neutral pH SCC Properties of Pipeline Steels of Grade X80 and X52
Mitsuru Sawamura*1, Hitoshi Asahi1, Tomohiko Omura2, Hirofumi Kishikawa3, Nobuyuki Ishikawa4, and Mitsuo Kimura4
(1)Nippon Steel Corporation; (2)Sumitomo Metal Industries, Ltd. Corporate Research and Development Laboratories; (3)Sumitomo Metal Industries, Ltd. Pipe & Tube Company; (4)JFE Steel Corporation
9:55 AM
11287
Effect of Chlorides on Stress Corrosion Cracking of Duplex Stainless Steels in Hot Alkaline Sulfide Solution
Kevin R. Chasse*1, Preet M. Singh1, and Sam Raji2
(1)School of Materials Science and Engineering, Georgia Institute of Technology; (2)Georgia Institute of Technology
10:20 AM
11288
Environmentally Assisted Cracking Study of a Newly Developed Titanium Alloy
Suresh C. Divi* and James S. Grauman
Titanium Metals Corporation (TIMET)
10:45 AM
11289
A Fundamental Study of an Fe-Cr (111) Binary Alloy-Metal Oxide (110)—Water Interfaces
Nishith Kumar Das* and Tetsuo Shoji
Fracture and Reliability Research Institute, Tohoku University
11:10 AM
Lunch Break
1:00 PM
11290
The Use of Secondary Ion Mass Spectrometry (SIMS) in Quality Control of Electroplated and Baked High-Strength Steels
Noam Eliaz*1, Elizabeta Kossoy2, and Gil Shemesh2
(1)Tel-Aviv University; (2)Materials Division, Depot 22, Israel Air Force
1:25 PM
11291
Role of Microstructural Anisotropy of Prestressing Steel on the Fractographic Appearance of Hydrogen-Assisted Micro-Damage
Jesus Toribio*, Diego Vergara, and Miguel Lorenzo
UNIVERSITY OF SALAMANCA
1:50 PM
11292
Effect of Post Weld Heat Treatment on the Hydrogen Trapping Behavior of Pressure Vessel Steel
Sung Jin Kim*1, Hwan Gyo Jung2, and Kyoo Young Kim1
(1)Graduate Institute of Ferrous Technology (GIFT), POSTECH; (2)Technical Research Center, POSCO
2:15 PM
11293
Effect of H2S/CO2 Corrosion Scale on Hydrogen Permeation
Wenhui Hao1, Lei Zhang*1, Han Li1, Minxu Lu2, and Lining Xu1
(1)University of Science and Technology Beijing; (2)Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Sciences and Technology Beijing
2:40 PM
Break
2:55 PM
11294
Susceptibility of Hydrogen-Induced Stress Cracking of Duplex Stainless Steel at Elevated Temperature
Roy Johnsen*
Norwegian University of Science and Technology
3:20 PM
11295
Hydrogen Damage and Prevention in the Oil Industry
Alec Groysman*1, Alberto Kaufman2, Boris Feldman2, and Reut Balali2
(1)Oil Refineries Ltd.; (2)IKA Laboratories
3:45 PM
11296
Environmentally Assisted Cracking Evaluation of Alloy IN686 (UNS N06686) Using Constant Extension Rate Testing
Michelle Gaudett Koul*1 and Peggy LeGrand2
(1)United States Naval Academy; (2)Naval Postgraduate School
4:10 PM
11297
Corrosion Fatigue Investigations of CrNiMoN Austenitic Stainless Steels
Clemens Vichytil*1, Gregor Mori2, Michael Panzenboeck3, Rainer Fluch4, and Robert Sonnleitner1
(1)Christian Doppler Laboratory of Localized Corrosion; (2)Christian Doppler Laboratory of Localized Corrosion, University of Leoben; (3)Department of Physical Metallurgy and Materials Testing; (4)Boehler Edelstahl GmbH & Co KG, Research and Development Special Materials
4:35 PM
11298
Mercury Embrittlement Crack Initiation in 5083 Aluminum Alloys--the Role of the Oxide Film
Richard E. Clegg*
Process Engineering and Light Metals Centre, CQUniversity Australia
See more of: Technical Symposium
<< Previous Session | Next Session >>